Cardsharing Server, IPTV.

Read RSS Twitter

Loading ...





    Sort by:

Author: Master 15-11-2019, 18:20 FAQ Cardsharing
 VU+ CCcam Setup

    VU+ CCcam Setup

For transferring the CCcam.cfg file into your VU+ SOLO or DUO, you need to use a FTP client. we suggest DCC!
Note: to download and see the tutorial of Dreambox Control Center click here.
Now, you just need to transfer the CCcam.cfg file into the /var/etc/ folder.
Note: If you already have a CCcam.cfg file in that location, simply right click the file and click edit to put your C-lines in it and save the file.
You can obtain the CCcam.cfg file from your service provider.
Note: If you have your C-lines, click here to see how you can create the CCcam.cfg file yourself!
Reboot your box and your CCcam Service will start working.
Details/Ordering Comments (0) Views: 18 722
VU+ CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:25 FAQ Cardsharing
 Technomate_CCcam_Setup

    Technomate_CCcam_Setup

To install cccam on technomate boxes, Simple procedure has to be followed.
First start up your box. Now follow these steps:
-Press and hold the power button on your box front panel as it starts up
-A number will appear in your front display and thats what your box IP Address ends in.
Note: For example if the number is 5, then your box Ip Address is 192.168.2.5
-Now with a web browser you need to connect to that IP by typing it in the browser.
Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx
-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"
 -If it requests for password, type and proceed
-Finally a field will appear with a button beside it called "Add Line"
-Remember the line format you should enter is like this: C: server port user pass
This was the standard procedure for installing CCcam on technomate boxes.
Details/Ordering Comments (0) Views: 21 123
Technomate_CCcam_Setup
Key-Tags:

Author: Master 15-11-2019, 18:32 FAQ Cardsharing
 Starview Combo HD Setting

    Starview Combo HD Setting

The Starview Combo HD has the tendency to create "freezing" by itself.
We recomment to update to the latest firmware which may make it a bit more stable.
- To prepare the receiver for C@rdSharing please follow the instructions below:
- Press menu / accessory /network.
- If you don't see server press 8989.
- Server -server setup , press ok.
- You should have 1 off 2 off 3off Up to 8 off
- Press ok on 1 off
- Change type to cccam.
- Name or IP address = First part of code.
- Port = part 2 of code (5digits)
- ID = third part of code
- Password = final part of code
- Deskey leave blank. You will probably need to change Type cccam to newcamd delete deskey and change back Type to cccam.
- Press apply.
- Exit out of everything and should be ok.
- On name or IP address do not enter C: just enter what follows after.
- To check status
- Menu/accessory/network/server
- You will have on number 01 cccam ****** ****connect If its wrong the same as above but with disconnect
Details/Ordering Comments (0) Views: 23 236
Starview Combo HD Setting
Key-Tags:

Author: Master 15-11-2019, 18:22 FAQ Cardsharing
 Spiderbox CCcam Setup

    Spiderbox CCcam Setup

How to CCcam Setup for a Spiderbox via USB or remote control
What do you need?
1. USB Stick
2. Valid cline
3. Make a file and name it server.cfg and input all c-lines that we've emaled you like "C: serverIP 123port username password"; ... Save it!
4. Copy the file server.cfg into the root of your USB Stick. Don't copy it in a specific folder otherwise the Spiderbox can't read the file
5. Send the file to the Spiderbox
6. Don't forget to enable your network, set it to DHCP
7. Reboot the box and start CCcam
CCcam setup via remote control:
1. Go to Menu
Accessory
Network
2. Enter your cline
Host Name (IP address):
Port:
User name:
password:
and APPLY.
3. Restart the box
4. Restart CCcam
Details/Ordering Comments (0) Views: 19 305
Spiderbox CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:33 FAQ Cardsharing
 Spiderbox 9000HD Setting

    Spiderbox 9000HD Setting

Example: C: server.net 699 argentina server.up4 server.net (IP ADDRESS) 699 (PORT) argentina (USERNAME) server.up4 (PASSWORD)
1. Press "Menu"
2. Highlight USB
3. Scroll down to "Network"
4. "OK" at 1st one, "Type-on"
5. Down to "1st server setup" press "OK", "Server 01", "OK", L-R to "CCcam"
6. Down to "IP" address, "OK", put in the IP ADDRESS. To save press "Menu"- "Save"
7. Down to "PORT" address, "OK", put in the PORT NUMBER . To save press "Menu"-"Save"
8. Down to "USERNAME", "OK", put in the USERNAME. To save press "Menu" -"Save"
9. Down to "PASSWORD", "OK", put in the PASSWORD. To save press "Menu"- "Save"
10. Down to Press "APPLY", "OK" --- "DONE"
11. Do the same this other servers Exit all menus.
Details/Ordering Comments (0) Views: 20 046
Spiderbox 9000HD Setting
Key-Tags:

Author: Master 15-11-2019, 18:23 FAQ Cardsharing
 Skybox F5 CCcam Setup

    Skybox F5 CCcam Setup

Format USB to FAT32 (on your pc)
Turn on F5, let it boot up and put USB in the back
Using remote control, press Menu ---> Network Local Settings . Press OK
Select Camds Setup -->ok ---> CCcam Client Setup --> ok
Select Update Files by USB
Select CCcam.cfg (which is your Nline that is installed on the root of your USB)
Then you have options to Add or Read or Cancel
cccam.cfg example (without any additional line or space beforefirst line or after last line):
C: cline1.server port user pass
C: cline2.server port2 user pass
C: cline3.server port3 user pass
C: cline4.server port4 user pass
C: cline5.server port5 user pass
Details/Ordering Comments (0) Views: 17 528
Skybox F5 CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:23 FAQ Cardsharing
 Samsat HD 80 CCcam Setup

    Samsat HD 80 CCcam Setup

Using USB and CCcam.cfg file:
Menu / Tools / CAS  /CAS Options / network sharing / read cccam.cfg from usb/ok
Manual Setup:
1- Unplug the receiver from the internet
2- Menu —> Tools—> CAS —> CAS Options —> FCAS Options —>Serial Port Use : disable GBOX SSSP and activate Morebox Protocol because you will also need to see his Morebox open channels…
If FCAS is not activated, with the remote press MENU and then dial 2 0 2 0 then FCAS enabled OK
3- Menu —> Tools—> CAS —> CAS Options —> FCAS Options —> Network sharing —-> ENABLE Network sharing !!!
4- Menu —> Tools—> CAS —> CAS Options —> FCAS Options —> Network sharing —- > CCcam servers —> Server 1 (you can choose server 1 ou 2 ou 3 ou 4 ou 5 +++) :
Fill CCCAM Server data in order using the remote control:
– HOST
– PORT
– USER
– PASS
Now the configuration of TCP / IP data Samsat receiver :
Menu —-> Congig Système —> Paramètres TCP/IP
Now check:
IP Auto = activated
Auto Obtain DNS: disable
Connect your Samsat HD80 to your ADSL Router with RJ45 cable …and wait 1 minute for the connection …!
Details/Ordering Comments (0) Views: 18 297
Samsat HD 80 CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:35 FAQ Cardsharing
 Penalties for rules

    Penalties for rules

 Rules and Penalty for Violation.
1. It is not allowed to connect to the server without valid subscription. If your subscription has finished or has been paused (suspended), you need to disconnect from the server the same day by deleting the settings you were provided in the billing from your receiver and reboot it. Simply speaking – you need to do an action opposite to the one when you connected to the server for your receiver to stop taking free sockets from the server and stop sending requests for encoding.   Penalty for violation – 5€
2. Cascading is strictly prohibited. It is not allowed to use delayed encoding and encode old records. It is allowed to watch and record simultaneously only 1 channel. It is not allowed PiP option (picture in picture) without pre-paid Dual Login option. It is allowed to send only 1 request for encoding each 10 seconds, 360 – per hour, 8,640 requests per day. Cascading is a theft resulted in banned account without possibility to restore. All your account funds will be abolished. With pre-paid Dual Login, limits will be doubled; it is allowed to use PiP; it is allowed to watch one channel and record the other one at a time.
3. It is not allowed to use delayed encoding. It is allowed to record programs only with real-time encoding. For the attempt to encode an old record resulting in the cards overload and all other users suffer, your account will be disabled without a possibility to restore, and balance will be nulled and void.............. 
Check Details!!!
Details/Ordering Comments (0) Views: 38 710
Penalties for rules
Key-Tags:

Author: Master 15-11-2019, 18:33 FAQ Cardsharing
 Openbox S9 HD Setting

    Openbox S9 HD Setting

1. Download the latest firmware upgrade.
2. If you already have an active CCcam c-lines - Your line will looks like this: C: (IP ADRESS) (PORT) (USERNAME) (PASSWORD)
3. Then copy/backup into CCcam.cfg file. Otherwise ask us to sent you ready CCcam.cfg file that will include your subscription c-lines.
4. Copy the 2 files (firmware/CCcam.cfg) that you have to a USB Flash Drive (USB Flash Drive have to be "FAT Format" and files have to be at the Start of drive i.e E: and NOT at any "Folder").
5. Plug the USB Flash Drive into the back of the receiver.
6. Setup your Openbox as normal, e.g. sat cable, hdmi or scart cable ,lan, power cable, etc. and turn it on.
7. On the "Remote control" Press "Menu", scroll down to "Tools" > "Upgrade by USB" (select the firmware .abs file that's on your USB Drive) > "Start"
8. It will then ask you if you wish to "Burn the Flash" , press "OK" = Yes
9. The new firmware will now be installed on the box and takes a few mins to complete.
10. (P.S. Please DON'T follow steps 6. & 7. if your Openbox is already updated with Firmware supports CCcam Emulator)
11. After receiver reboots ,press "Menu" > "Network Setup" > "Network Setup" and turn "DHCP ON" and Apply.
12. Then back to the Menu Screen and "Network Setup" and press > "CCcam client setup" > "Update Files by USB".
13. Select the "CCcam.cfg" and then press "Read" > then Reboot.
14. Then back to Menu Screen and "Network Setup" > "CCcam client Setup" > "Manage Config Files" > "CCcam.cfg",and Activate all your c-lines (you have to highlight each one and Activate).
15. Reboot the box and remove the USB
Details/Ordering Comments (0) Views: 25 972
Openbox S9 HD Setting
Key-Tags:

Author: Master 15-11-2019, 18:24 FAQ Cardsharing
 Openbox and Skybox CCcam Setup

    Openbox and Skybox CCcam Setup

ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLE
CLINE SETUP
1: Go into the main menu
2: Select Network, enable your network and set the IP address to DHCP. Go back to network.
3: Select "CCcam Client Setup" If you can not see CCcam setup in the menu jump to number 9
4: If you have a cccam.cfg on your usb, we provide the CCcam.cfg file, ask for the full configured file from us to get all of our channels. Copy the CCcam.cfg file into the root folder from your USB stick. Do not copy the file in a specific folder.Select 'Update files by usb' if not, jump to number 10
5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on remote (READ)
6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP 'off' by using arrow keys and then hitting apply.
8: if channel still doesnt clear, reboot box and router by unplugging both from power and plugging back in (router first)
9: if you cant see this option go to network and press 6666 this should bring up hiden menu or 8888
10: for those who didnt create a cccam.cfg on their usb, you can add it manually..
a] instead of update by usb on ccccam client setup, go directly to Manage Config Files and select CCcam.cfg from new window
b] Press Blue button on remote
c] your cline will look something like this>>> C: example.3dcccamserver.com 12000 user pass
d] ON add cline window, leave Protocol as CCcam
e] Host: here you would enter example.3dcccamserver.com portion of your cline using remote number buttons like you was sending a text
f] Port: here you put 12000
g] User, write 'user' here
f: Password, write 'pass' here
g] Press ok and go up to instruction number 7 OF CLINE SETUP
Details/Ordering Comments (0) Views: 29 931
Openbox and Skybox CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:27 FAQ Cardsharing
 Iris 9900 HD CCCam Setup

    Iris 9900 HD CCCam Setup

In this tutorial I will try to explain briefly how to configure cccam in 9900 Iris HD decoders, this shall be to use a different server.
- To work in cccam protocol, make a file with this name: cccam_accounts.txt
- Open the cccam_accounts.txt file with notepad. It should look something like this:
{C,Port,Server,User,Password}
{C,Port,Server,User,Password}
{C,Port,Server,User,Password}
– To insert our clines, we just edit the file cccam_acounts.txt replacing examples by data from our cline.
– We should note that Iris 9900 only allowed a maximum of 10 clines.
– Once you have filled the lines, save the document and put it in a pendrive.
– We connect the pendrive in the deco.
– Press the Menu button.
– Press 6666.
– We stand on the CCCam choice and mark it with the blue button to activate.
cccam server
– Press to OK and enter into CCCam.
– We give the green button (File Explorer).
Note: Here we may introduce our cline optionally manually with the remote.
cccam
– Cccam_accounts locate the file and give it to Ok.
cccam_3 
– The clines will be charged and shall return back to the Settings screen CCCAM.
– In No you can switch between clines that you have added and connected to each of them you have to just give Connect.
– Status of each can see if it is active or not.
Details/Ordering Comments (0) Views: 20 643
Iris 9900 HD CCCam Setup
Key-Tags:

Author: Master 15-11-2019, 18:28 FAQ Cardsharing
 How to Make CCcam.cfg file

    How to Make CCcam.cfg file

Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to work. Usually users ask their providers for a cfg file not knowing they can create it themselves. Doing this is pretty much easy and you only need to have your CCcam lines to put in it.

First, create a simple text document.
Put your CCcam lines in it. Make sure your Lines have the correct format according to your box.
Note: usual format of CCcam lines is C: server port user pass
Now from the top left side of your text document click File > Save As ....
At the bottom there is a section called "Save As Type", change it to "All Files".
Then from the top of it in "File Name" write CCcam.cfg and save it.
Note: remember it`s vital that the first two C`s be in Caps Letters.
Thats it, your CCcam.cfg file is ready to be used.
Details/Ordering Comments (0) Views: 22 799
How to Make CCcam.cfg file
Key-Tags:

Author: Master 15-11-2019, 18:29 FAQ Cardsharing
 How to Install Dreambox Control Center

    How to Install Dreambox Control Center

Most of users are looking for a simple way to manage their receiver boxes via a flexible and well equipped FTP program. Some of you might use Filezilla or any other FTP clients but here we suggest you use the best FTP program which is designed for receiver boxes file management. You can manage or install your images, plugins or any other thing you want to upload or download from your box. One of the most common purposes is uploading/editing CCcam.cfg file.    First of all click here to download the zip folder containing DCC version 2.96
Now extract the folder and open DCC. 
 
 
Click DETAILS... for FULL Article! 
Details/Ordering Comments (0) Views: 20 225
How to Install Dreambox Control Center
Key-Tags:

Author: Master 15-11-2019, 18:30 FAQ Cardsharing
 Engel RS 4800 Y CCcam Setup

    Engel RS 4800 Y CCcam Setup

1- Open notepad on pc.
2- Enter your cccam lines 
3- Save the file as CCcam_Newcamd.cfg
4- Put the file in USB
5- Insert the USB in your engel
6- Menu / Update / Upgrade by USB
7- update mode cccam_newcamd | cccam_newcamd.cfg file | ok
8- flash Quemas
9-Disable IKS (Menu / 7777 / IKS / DES)
Details/Ordering Comments (0) Views: 15 621
Engel RS 4800 Y CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:31 FAQ Cardsharing
 Cloud Ibox 4 CCcam Setup

    Cloud Ibox 4 CCcam Setup

1. Stick on a clone safe image
2. Do your basic setup/ forget the channel scan say you will di it later manuly
3. Goto autoboquets hit advanced settings fill in the sections and save. do a scan let it do its thing this will automaticly create your channel list. then set it to do a update evreyday
4. Download filezilla to your pc
5. Once downloade find the ip of your satbox.
6. Type this into filezilla and the username is root
7. If you are going to put your c-line in Cccam.cfg open var/etc on filezilla and replace the one Ccam.config file that is there
8. Download Cccam2.13 and place this in the tmp folder using filezilla
9. Hit menu/vix/manage local extentions and just install Cccam2.13
10 Hit men/vix/softcam/ci and start Cccam 2.13 and the tick enable on start up and save.
Details/Ordering Comments (0) Views: 20 527
Cloud Ibox 4 CCcam Setup
Key-Tags:

Author: Master 15-11-2019, 18:36 FAQ Cardsharing
 Ariva 150 CCcam Setup

    Ariva 150 CCcam Setup

DO NOT load any channel file from any other receiever as it will brick you box, only files for ferguson Ariva 150 will work.
Once you have upgraded the firmware you need your line details. Go to menu then network local settings. Press the red button on remote and you will then see another window. Assuming you are using cccam enter the details as follows.
URL your server site address
port what ever port no your server gave you,
username
password.
So your details will probably be sent to you like this
C: 123.123.123.123 port-number username password
Once entered at bottom off page press connect and you should be in.
Details/Ordering Comments (0) Views: 15 363
Ariva 150 CCcam Setup
Key-Tags:



Cardsharing, IPTV General menu  Last Comments:

Cardsharing, IPTV General menu  Top Packs:

Cardsharing, IPTV General menu  SEO-Stats:

  • Statistics since Nov,25 2019:


    Msn bot last visit  for cwdw.biz Cardsharing
    Google PageRank Checker for cwdw.biz Cardsharing
    Yahoo bot last visit  for cwdw.biz Cardsharing
    PR cwdw.biz:
    YANDEX Cardsharing Statistics
    Flag Counter
    Flag Counter

Cardsharing, IPTV General menu  Online-Stats:

  • Total on Site: ( 4)
    Guests: ( 4)
    Guest Guest Guest Guest
    Robots: ( 0)
    Users: ( 0)
  • Reclam
  • Reclam
  • Reclam
  • Reclam

Tv-Share.com, CwDw.biz. Copyright © 2005-2020 All Rights Reserved.
Back to Top!